2018 Caterpillar 315F LCR Excavator
Lot 12 · Stock EX-88402 · Serial CAT0315FTNCF01923 · Superior, MT · 4 photos · 0 views
1 / 4
Condition report
Percentages are remaining service life measured at inspection, not a subjective rating. Anything under 60% is called out in the notes below.
- Included
- 36" digging bucket · hydraulic thumb · quick coupler
- Serviced
- Last full service at 5,100 hrs. Hydraulics tested and holding, no drift.
- Known faults
- Undercarriage at 60% — factor replacement into your bid. Cosmetic boom scuffing.
Transport dimensions
| Shipping length | 27'9" |
|---|---|
| Shipping width | 8'2" |
| Shipping height | 9'6" |
| Weight | 35,800 lbs |
| Carrier | Standard step-deck, no permit required |
Specifications
| Year | 2018 |
|---|---|
| Manufacturer | Caterpillar |
| Model | 315F LCR |
| Hour meter | 5,240 Hours |
| Engine HP | 96 HP |
| Engine | Cat C4.4 ACERT Turbo Diesel |
| Operating weight | 35,800 lbs |
| Fuel | Diesel |
| Serial number | CAT0315FTNCF01923 |
| Condition | used |
| Stock number | EX-88402 |
| Location | Superior, MT 59872 |
| Category | Excavators |
Operating specifications
| Operating weight | 35,800 lbs |
|---|---|
| Max dig depth | 19 ft 1 in |
| Max reach | 27 ft 9 in |
| Bucket capacity | 0.85 yd³ |
Machine overview
2018 Caterpillar 315F LCR Excavator with 5,240 hours. A reduced-radius machine that works well on roadside and confined urban jobs where a conventional tail swing gets in the way. Powered by a 96 HP Cat C4.4 ACERT diesel. Fitted with a hydraulic thumb, 36-inch digging bucket and quick coupler. Enclosed cab with heat and air conditioning. Undercarriage at approximately 60 percent. Hydraulics tested and holding with no drift. Honest hours and a solid work history.
- Reduced-radius tail swing
- Hydraulic thumb and quick coupler
- 36" digging bucket included
- Approximately 60% undercarriage remaining
- Enclosed cab with heat and A/C